Installation in 3 easy steps
Because our slide out drawers come in one piece, are pre-assembled, and have a factory aligned base, the installation is easily done in 3 steps
1 Slide the entire unit onto your cabinet shelf
The bottom shelf is always fixed. The middle shelf may be fixed or adjustable.
The drawer must be installed on a fixed shelf, otherwise the shelf will tip up when the drawer is extended. To secure the slide out kitchen shelves fasten a steel angle to the back of the shelf and the back of the cabinet.
2 Fasten the base to the shelf with 4 screws
Place the drawer base on the shelf with the rollers facing you.
Center the base and set it back 1.5″ from the front of the shelf.
Screw down the front 2 screws followed by the back screws.
3 Pop the drawer into the base unit
Place the rollers on the back of the drawer over the rollers on the base and drop.